fbpx

BOILER

SEG PELLET

Contact an advisor
General information
Technical data
Dimensions
Documentation

Essential information

The SEG PELLET boiler uses reliable technological and design solutions that make it an exceptionally effective and proven source of heat. The boiler is adapted to the efficient combustion of wood pellets in accordance with the norm 303-5:2021-09. It is equipped with a self-cleaning burner. Pellet lighter cooperating with the RTC clock, lighting up and extinguishing the boiler according to the schedule, reducing the number of activities to be performed at the boiler to almost zero. Thanks to the option of connecting the ecoNET300 internet module to the boiler, you can control the boiler’s functions using a phone, tablet, or computer.
Warranty conditions in the DTR Manual
Z
Available powers: 15kW | 20kW | 25kW | 34kW
Z
Fuel: Pellets
Z
Certificates: EcoDesign | 5 class
Z
Energy class: A +

Key benefits

Z

Heat exchanger

Horizontal and vertical convection channels | shelf
Effective design for quick cleaning of the exchanger on the front and top. The design of the boiler exchanger ensures high heat removal from the furnace.
Z

Flue outlet

At the back of the boiler
The structure of the boiler has been designed in such a way that the flue outlet is at the rear. The use of such a solution in a central heating boiler allows the flue to be directly led out to the chimney.
Z

Limit switch

For the sake of your safety, the boiler is equipped with a limit switch. The end protection system is located in the boiler door. Each opening of the door causes the burner and other elements of the boiler to stop working automatically until they are closed again.
Z

Steel screens

The use of steel screens in the combustion chamber improves the efficiency of the combustion process. The screens increase the temperature in the combustion chamber and stop the particles floating above the furnace, burning them up. The thermal efficiency of the boiler increases, and the flue gas has a reduced amount of compounds harmful to the environment to a minimum.
Z

Automatic feeder

The PLATINUM PELLET controller, based on the information received from the sensors, determines the demand for fuel and doses it the right amount. The process of fuel combustion itself is therefore very economical, ecological and does not require additional service on the part of the user.
Z

Swirlers

The swirlers installed in the convection channels effectively reduce the speed of the exhaust gas outlet while maintaining high heat reception through the water jacket.

Boiler control

Adjust the boiler operation and room temperature to your individual needs. The PLATINUM PELLET controller is programmed in such a way as to automate all processes related to the heating of your home. The owner specifies the temperature he wants to have in the apartment, and the controller will optimize combustion in this respect. Entering the advanced driver settings, you can personalize each parameter. It all depends on the preferences of the user and household members!

Key features:

E
One CH.1 mixing circuit with room thermostat
E
Pump (DHW, CH, additional)
E
RTC clock with weekly timer
E
Weather control
E
Winter / summer operation mode
E
FuzzyLogic & PID

Optional equipment:

E
ecoNET 300 internet module
Control the work, monitor, compare the statistics thanks to the connection of the boiler controller with the internet module. Gain access to boiler control from a mobile phone, tablet or computer. The internet module is not only a remote control, it also records and registers the course of heating the house. Thanks to the ecoNET internet module (wired, wi-fi) you can gain control over your expenses and nothing will surprise you anymore!
E
Lambda probe
E
PLATINUM TOUCH room thermostat (touch, wired)
E
PLATINUM TOUCH x40 room thermostat (analog, wireless)
E
PLATINUM TOUCH x80 room thermostat (touch, wireless)
E
Platinum B module (buffer operation control, additional two heating circuits, 2x pump, 2x mixer, 2x thermostat)
E
Platinum C module (two additional heating circuits, 2x pump, 2x mixer, 2x thermostat)

Pellet burner

Self-cleaning PPW burner – for pellets

Quick firing up of the furnace and automatic cleaning of the furnace of ash. The burner is equipped with an automatic ceramic pellet igniter and has been designed for regular, automatic cleaning of ash. The design of the burner allows you to quickly reach a high temperature of the boiler. All functions of cleaning the furnace from ash and fuel dosage can be set in accordance with the current needs of the user.

Key features:

E
Fuel: Pellet
Ecological fuel such as pellets, also known as biomass, is produced by pressing wood waste such as sawdust or shavings. This completely natural fuel turns into biodegradable ash after burning.
E
Ceramic pellet lighter
Forget about manual boiler lighting. One click is enough and the automatic ceramic igniter ignites the fuel fed to the burner. Automatic igniter in conjunction with the RTC clock allows you to program the entire week of operation of the device. The device operation clock can be set separately for SUMMER and WINTER mode.
E
Automatic cleaning
The burner is cleaned of ash on its own on a regular basis, which reduces the need for manual cleaning to a minimum. The use of this technology prevents clogging of the furnace chamber with ash, and also allows the burner to be kept in excellent efficiency.

Technical data of the boiler

PARAMETERS UNIT S.I. SEG PELLET 15
Nominal thermal power [kW] 15
Boiler power range [kW] 4,5-15
Heatable surface* [m2] 67,5-225
Heating area [m2] 2,1
Water capacity [L] 66
Maximum working pressure [bar] 3
Maximum working temperature [°C] 80
Test pressure [bar] 4,5
Fuel tank capacity [L] 150
Fuel tank capacity [kg] 90
Fuel [-] pellets Φ6-8mm
Electrical connection [-] 2A; ~230V; 50Hz
Electric power consumption [W] 120
Temperature controller setting range [°C] 60-80 (every 1°C)
Chimney draft required [Pa] 24
Boiler weight [kg] 379

* A new building with very good thermal insulation was adopted for the calculations.

PARAMETERS UNIT S.I. SEG PELLET 20
Nominal thermal power [kW] 20
Boiler power range [kW] 6-20
Heatable surface* [m2] 90-300
Heating area [m2] 2,54
Water capacity [L] 74
Maximum working pressure [bar] 3
Maximum working temperature [°C] 80
Test pressure [bar] 4,5
Fuel tank capacity [L] 220
Fuel tank capacity [kg] 132
Fuel [-] pellets Φ6-8mm
Electrical connection [-] 2A; ~230V; 50Hz
Electric power consumption [W] 120
Temperature controller setting range [°C] 60-80 (every 1°C)
Chimney draft required [Pa] 26
Boiler weight [kg] 453

* A new building with very good thermal insulation was adopted for the calculations.

PARAMETERS UNIT S.I. SEG PELLET 25
Nominal thermal power [kW] 25
Boiler power range [kW] 7,5-25
Heatable surface* [m2] 112,5-375
Heating area [m2] 2,85
Water capacity [L] 83
Maximum working pressure [bar] 3
Maximum working temperature [°C] 80
Test pressure [bar] 4,5
Fuel tank capacity [L] 230
Fuel tank capacity [kg] 138
Fuel [-] pellets Φ6-8mm
Electrical connection [-] 2A; ~230V; 50Hz
Electric power consumption [W] 120
Temperature controller setting range [°C] 60-80 (every 1°C)
Chimney draft required [Pa] 28
Boiler weight [kg] 484

* A new building with very good thermal insulation was adopted for the calculations.

PARAMETERS UNIT S.I. SEG PELLET 30
Nominal thermal power [kW] 30
Boiler power range [kW] 9-30
Heatable surface* [m2] 135-450
Heating area [m2] 3,11
Water capacity [L] 95
Maximum working pressure [bar] 3
Maximum working temperature [°C] 80
Test pressure [bar] 4,5
Fuel tank capacity [L] 230
Fuel tank capacity [kg] 138
Fuel [-] pellets Φ6-8mm
Electrical connection [-] 2A; ~230V; 50Hz
Electric power consumption [W] 120
Temperature controller setting range [°C] 60-80 (every 1°C)
Chimney draft required [Pa] 30
Boiler weight [kg] 488,5

* A new building with very good thermal insulation was adopted for the calculations.

Certificates, class, boiler emission

PARAMETERS UNIT S.I. SEG PELLET 15
Ecodesign [-] Yes
Boiler class [-] 5
Energy class [-] A+
Seasonal particulate emissions [mg/m3] 17
Efficiency for nominal power [%] 91,2
Nominal emissivity of the particulate matter [mg/m3] 19
Efficiency at minimum power [%] 90,1
Minimum emissivity of particulate matter [mg/m3] 16
PARAMETERS UNIT S.I. SEG PELLET 20
Ecodesign [-] Yes
Boiler class [-] 5
Energy class [-] A+
Seasonal particulate emissions [mg/m3] 17
Efficiency for nominal power [%] 91,1
Nominal emissivity of the particulate matter [mg/m3] 14
Efficiency at minimum power [%] 89,1
Minimum emissivity of particulate matter [mg/m3] 17
PARAMETERS UNIT S.I. SEG PELLET 25
Ecodesign [-] Yes
Boiler class [-] 5
Energy class [-] A+
Seasonal particulate emissions [mg/m3] 28
Efficiency for nominal power [%] 91,2
Nominal emissivity of the particulate matter [mg/m3] 19
Efficiency at minimum power [%] 90,3
Minimum emissivity of particulate matter [mg/m3] 28
PARAMETRY JEDNOSTKA S.I. SEG PELLET 30
Ecodesign [-] tak
Klasa kotła [-] 5
Klasa energetyczna [-] A+
Sezonowa emisyjność cząstek stałych [mg/m3] 28
Sprawność dla mocy nominalnej [%] 91,3
Nominalna emisyjność cząstek stałych [mg/m3] 19
Sprawność dla mocy minimalnej [%] 90,2
Minimalna emisyjność cząstek stałych [mg/m3] 29

Boiler dimensions

DIMENSION UNIT S.I. SEG PELLET 15
A [mm] 1150
B1 [mm] 530
B2 [mm] 615
C1 [mm] 1185
C2 [mm] –
D1 [mm] 930
D2 [mm] 780
E [mm] –
F1 [mm] 908
F2 [mm] 214
F3 [mm] 214
F4 [mm] 413
G1 [mm] 180
G2 [cal] 3/4
G3 [cal] 1 1/2
G4 [cal] 1 1/2
H [mm] 30
DIMENSION UNIT S.I. SEG PELLET 20
A [mm] 1150
B1 [mm] 530
B2 [mm] 615
C1 [mm] 1380
C2 [mm] –
D1 [mm] 970
D2 [mm] 815
E [mm] –
F1 [mm] 1105
F2 [mm] 250
F3 [mm] 210
F4 [mm] 423
G1 [mm] 180
G2 [cal] 3/4
G3 [cal] 1 1/2
G4 [cal] 1 1/2
H [mm] 30
DIMENSION UNIT S.I. SEG PELLET 25
A [mm] 1110
B1 [mm] 530
B2 [mm] 570
C1 [mm] 1440
C2 [mm] –
D1 [mm] 1020
D2 [mm] 860
E [mm] –
F1 [mm] 1162
F2 [mm] 246
F3 [mm] 206
F4 [mm] 472
G1 [mm] 180
G2 [cal] 3/4
G3 [cal] 1 1/2
G4 [cal] 1 1/2
H [mm] 30
DIMENSION UNIT S.I. SEG PELLET 30
A [mm] 1160
B1 [mm] 580
B2 [mm] 540
C1 [mm] 1440
C2 [mm] –
D1 [mm] 1020
D2 [mm] 860
E [mm] –
F1 [mm] 1162
F2 [mm] 246
F3 [mm] 206
F4 [mm] 472
G1 [mm] 180
G2 [cal] 3/4
G3 [cal] 1 1/2
G4 [cal] 1 1/2
H [mm] 30

Boiler documentation

DTR instruction

Technical and operational documentation for the SEG PELLET boiler Download

Driver manual

PLATIUM PELLET controller manual Download

EcoDesign certificate

The boiler complies with the requirements of the EcoDesign standard (EkoProjekt) Download

Energy label

A + energy class Download

Product sheet in accordance with EU regulation 2015/1187

According to EU Regulation 2015/1187 supplementing Directive 2009/125 / EC of the European Parliament and of the Council Download

Product sheet in accordance with EU regulation 2015/1189

Compliant with the EU Commission Regulation 2015/1189 of April 28, 2015 Download

Foreign sales

Do you have a question about your future central heating boiler?

Paweł Czepiel

Export manager
Language: Russian, English
Monday-Friday (7:00 a.m. – 3:00 p.m.)

Phone:

+48 663 45 32 22
+48 85 711 94 54 ext. 17

Call me

E-mail:

p.czepiel@metalfach.com.pl

Write
METAL-FACH Technika Grzewcza Sp. z o.o. reserves the right to introduce changes to the technical parameters, equipment and specifications of the offered goods without prior notice.

General contact:

Opening hours:

  • Mon.-Fri. 7:00a.m.-3:00p.m.
  • Phone: +48 85 711 94 54 int. 17
  • E-mail: p.czepiel@metalfach.com.pl

General contact:

Service contact:

Opening hours:

  • Mon.-Fri. 7:00a.m.–3:00 p.m.
  • Phone: +48 85 711 94 54 int. 17
  • E-mail: p.czepiel@metalfach.com.pl

Address data:

METAL-FACH Technika Grzewcza
Sp. z o.o.

  • st. Sikorskiego 66, 16-100 Sokółka, Poland
  • NIP: 545-182-60-12
  • REGON: 523566030

How to get: