BOILER

SE

Contact an advisor

General information

Technical data

Dimensions

Documentation

Essential information

Warranty conditions in the DTR Manual

The SE boiler is an ideal solution dedicated to people who have a large supply of properly stored firewood or use ordinary coal. The operation of our device at nominal power allows for better use of fuel, and, as a result, also cleaner exhaust fumes into the atmosphere. Additionally, the boiler can be equipped with automatics regulating combustion and operation of the device.

Z

Available powers: 60kW | 75kW | 95kW | 120kW | 150kW | 200kW | 250kW | 350kW

Z

Fuel: Firewood, coal

Key benefits

Z

Heat exchanger

Horizontal convection channels | regimental
Effective design for quick cleaning of the exchanger from the front. The design of the boiler exchanger ensures high heat removal from the furnace.

Z

Flue outlet

At the back of the boiler
The structure of the boiler has been designed in such a way that the flue outlet is at the rear. The use of such a solution in a central heating boiler allows the flue to be directly led out to the chimney.

Z

Secondary air damper

Air opening with regulation, which allows more accurate combustion of fuel particles floating in the combustion chamber.

Z

Blower fan

Accessories
Effectively supports the natural exhaust gas flow in the boiler. Additionally, it prevents smoke from escaping from the boiler to the boiler room. It also requires a driver to be installed.

Z

Draft regulator

Accessories
Depending on the temperature of the medium, it controls the flap regulating the air supply to the boiler combustion chamber.

Boiler control

Accessories

Simple boiler control

Adjust the boiler operation and room temperature to your individual needs. The DK SYSTEM-420 controller is programmed in such a way as to automate partially the processes related to heating your home. The owner specifies the temperature he wants to have in the room, and the controller will optimize combustion in this respect.

Key features:

E

Pump (DHW, C.H.1)

E

Room thermostat

E

WINTER / SUMMER operation mode

Manual firing up

Manual ignition and fuel loading

We can load firewood or coal into the combustion chamber. Wood, unlike coal, properly seasoned is an ecological fuel that meets all standards. It is completely natural, as a result of combustion, biodegradable ash is produced. By burning properly seasoned wood, we produce a small amount of harmful compounds into the atmosphere.

Technical data of the boiler

PARAMETERS	UNIT S.I.	SE 60
Nominal thermal power	[kW]	60
Boiler power range	[kW]	60
Heatable surface*	[m²]	600
Heating area	[m²]	3,4
Water capacity	[L]	90
Maximum working pressure	[bar]	1,5
Maximum working temperature	[°C]	95
Test pressure	[bar]	4
Fuel	[-]	wood, coal
Chimney draft required	[Pa]	–
Boiler weight	[kg]	438

* A new building with very good thermal insulation was adopted for the calculations.

PARAMETERS	UNIT S.I.	SE 75
Nominal thermal power	[kW]	75
Boiler power range	[kW]	75
Heatable surface*	[m²]	600-750
Heating area	[m²]	3,8
Water capacity	[L]	105
Maximum working pressure	[bar]	1,5
Maximum working temperature	[°C]	95
Test pressure	[bar]	4
Fuel	[-]	wood, coal
Chimney draft required	[Pa]	–
Boiler weight	[kg]	480

* A new building with very good thermal insulation was adopted for the calculations.

PARAMETERS	UNIT S.I.	SE 95
Nominal thermal power	[kW]	95
Boiler power range	[kW]	95
Heatable surface*	[m²]	750-950
Heating area	[m²]	4,5
Water capacity	[L]	115
Maximum working pressure	[bar]	1,5
Maximum working temperature	[°C]	95
Test pressure	[bar]	4
Fuel	[-]	wood, coal
Chimney draft required	[Pa]	–
Boiler weight	[kg]	521

* A new building with very good thermal insulation was adopted for the calculations.

PARAMETERS	UNIT S.I.	SE 120
Nominal thermal power	[kW]	120
Boiler power range	[kW]	120
Heatable surface*	[m²]	950-1200
Heating area	[m²]	6,9
Water capacity	[L]	260
Maximum working pressure	[bar]	1,5
Maximum working temperature	[°C]	95
Test pressure	[bar]	4
Fuel	[-]	wood, coal
Chimney draft required	[Pa]	–
Boiler weight	[kg]	850

* A new building with very good thermal insulation was adopted for the calculations.

PARAMETERS	UNIT S.I.	SE 150
Nominal thermal power	[kW]	150
Boiler power range	[kW]	150
Heatable surface*	[m²]	1200-1500
Heating area	[m²]	8,0
Water capacity	[L]	290
Maximum working pressure	[bar]	1,5
Maximum working temperature	[°C]	95
Test pressure	[bar]	4
Fuel	[-]	wood, coal
Chimney draft required	[Pa]	–
Boiler weight	[kg]	1015

* A new building with very good thermal insulation was adopted for the calculations.

PARAMETERS	UNIT S.I.	SE 200
Nominal thermal power	[kW]	200
Boiler power range	[kW]	200
Heatable surface*	[m²]	1500-2000
Heating area	[m²]	9,2
Water capacity	[L]	316
Maximum working pressure	[bar]	1,5
Maximum working temperature	[°C]	95
Test pressure	[bar]	4
Fuel	[-]	wood, coal
Chimney draft required	[Pa]	–
Boiler weight	[kg]	1090

* A new building with very good thermal insulation was adopted for the calculations.

PARAMETERS	UNIT S.I.	SE 250
Nominal thermal power	[kW]	250
Boiler power range	[kW]	250
Heatable surface*	[m²]	2000-2500
Heating area	[m²]	10
Water capacity	[L]	330
Maximum working pressure	[bar]	1,5
Maximum working temperature	[°C]	95
Test pressure	[bar]	4
Fuel	[-]	wood, coal
Chimney draft required	[Pa]	–
Boiler weight	[kg]	1160

* A new building with very good thermal insulation was adopted for the calculations.

PARAMETERS	UNIT S.I.	SE 350
Nominal thermal power	[kW]	350
Boiler power range	[kW]	350
Heatable surface*	[m²]	2500-3500
Heating area	[m²]	18,32
Water capacity	[L]	713
Maximum working pressure	[bar]	1,5
Maximum working temperature	[°C]	95
Test pressure	[bar]	4
Fuel	[-]	wood, coal
Chimney draft required	[Pa]	–
Boiler weight	[kg]	2050

* A new building with very good thermal insulation was adopted for the calculations.

Boiler dimensions

DIMENSION	UNIT S.I.	SE 60
A	[mm]	530
B1	[mm]	–
B2	[mm]	–
C1	[mm]	1530
C2	[mm]	–
D1	[mm]	960
D2	[mm]	800
E	[mm]	–
F1	[mm]	1330
F2	[mm]	225
F3	[mm]	584
F4	[mm]	175
G1	[mm]	200
G2	[cal]	1 1/2
G3	[cal]	1 1/2
G4	[cal]	3/4
H	[mm]	30

DIMENSION	UNIT S.I.	SE 75
A	[mm]	580
B1	[mm]	–
B2	[mm]	–
C1	[mm]	1530
C2	[mm]	–
D1	[mm]	960
D2	[mm]	800
E	[mm]	–
F1	[mm]	1330
F2	[mm]	225
F3	[mm]	584
F4	[mm]	175
G1	[mm]	200
G2	[cal]	1 1/2
G3	[cal]	1 1/2
G4	[cal]	3/4
H	[mm]	30

DIMENSION	UNIT S.I.	SE 95
A	[mm]	680
B1	[mm]	–
B2	[mm]	–
C1	[mm]	1530
C2	[mm]	–
D1	[mm]	960
D2	[mm]	800
E	[mm]	–
F1	[mm]	1330
F2	[mm]	225
F3	[mm]	584
F4	[mm]	185
G1	[mm]	200
G2	[cal]	1 1/2
G3	[cal]	1 1/2
G4	[cal]	3/4
H	[mm]	30

DIMENSION	UNIT S.I.	SE 120
A	[mm]	770
B1	[mm]	–
B2	[mm]	–
C1	[mm]	1830
C2	[mm]	–
D1	[mm]	1550
D2	[mm]	1120
E	[mm]	–
F1	[mm]	1690
F2	[mm]	195
F3	[mm]	480
F4	[mm]	100
G1	[mm]	250
G2	[cal]	2
G3	[cal]	2
G4	[cal]	3/4
H	[mm]	30

DIMENSION	UNIT S.I.	SE 150
A	[mm]	860
B1	[mm]	–
B2	[mm]	–
C1	[mm]	1910
C2	[mm]	–
D1	[mm]	1580
D2	[mm]	1170
E	[mm]	–
F1	[mm]	1780
F2	[mm]	180
F3	[mm]	660
F4	[mm]	155
G1	[mm]	250
G2	[cal]	2
G3	[cal]	2
G4	[cal]	3/4
H	[mm]	30

DIMENSION	UNIT S.I.	SE 200
A	[mm]	860
B1	[mm]	–
B2	[mm]	–
C1	[mm]	2110
C2	[mm]	–
D1	[mm]	1580
D2	[mm]	1170
E	[mm]	–
F1	[mm]	1980
F2	[mm]	180
F3	[mm]	655
F4	[mm]	155
G1	[mm]	250
G2	[cal]	2
G3	[cal]	2
G4	[cal]	3/4
H	[mm]	30

DIMENSION	UNIT S.I.	SE 250
A	[mm]	860
B1	[mm]	–
B2	[mm]	–
C1	[mm]	2110
C2	[mm]	–
D1	[mm]	1580
D2	[mm]	1270
E	[mm]	–
F1	[mm]	1980
F2	[mm]	180
F3	[mm]	655
F4	[mm]	155
G1	[mm]	250
G2	[cal]	2
G3	[cal]	2
G4	[cal]	3/4
H	[mm]	30

DIMENSION	UNIT S.I.	SE 350
A	[mm]	1202
B1	[mm]	–
B2	[mm]	–
C1	[mm]	2030
C2	[mm]	–
D1	[mm]	2230
D2	[mm]	1726
E	[mm]	–
F1	[mm]	1553
F2	[mm]	382
F3	[mm]	711
F4	[mm]	344
G1	[mm]	350
G2	[mm]	101,6
G3	[mm]	101,6
G4	[cal]	1 1/4
H	[mm]	30

Boiler documentation

DTR instruction

Technical and operational documentation for SE boiler

Download

Driver manual

DK SYSTEM-420 controller manual

Download

Foreign sales

Do you have a question about your future central heating boiler?

Paweł Czepiel

Export manager
Language: Russian, English
Monday-Friday (7:00 a.m. – 3:00 p.m.)

Phone:

+48 663 45 32 22
+48 85 711 94 54 ext. 17

Call me

E-mail:

p.czepiel@metalfach.com.pl

Write

METAL-FACH Technika Grzewcza Sp. z o.o. reserves the right to introduce changes to the technical parameters, equipment and specifications of the offered goods without prior notice.

General contact:

Opening hours:

Mon.-Fri. 7:00a.m.-3:00p.m.
Phone: +48 85 711 94 54 int. 17
E-mail: p.czepiel@metalfach.com.pl

General contact:

Service contact:

Opening hours:

Mon.-Fri. 7:00a.m.–3:00 p.m.
Phone: +48 85 711 94 54 int. 17
E-mail: p.czepiel@metalfach.com.pl

Address data:

METAL-FACH Technika Grzewcza
Sp. z o.o.

st. Sikorskiego 66, 16-100 Sokółka, Poland
NIP: 545-182-60-12
REGON: 523566030

BOILER

SE

Essential information

Key benefits

Heat exchanger

Flue outlet

Secondary air damper

Blower fan

Draft regulator

Boiler control

Simple boiler control

Key features:

Manual firing up

Manual ignition and fuel loading

Technical data of the boiler

Boiler dimensions

Boiler documentation

DTR instruction

Driver manual

Foreign sales

Paweł Czepiel

Phone:

E-mail:

General contact:

General contact:

Service contact:

Address data:

How to get: