BOILER
SMART PELLET WF PRO
Essential Information
An ideal solution tailored to those who value efficiency and expect a high level of comfort. This device can be configured with the chimney outlet at the top or the rear. The boiler is designed for efficient burning of wood pellets in accordance with the norm 303-5:2021-09. It is equipped with a self-cleaning burner. The pellet igniter, in collaboration with an RTC clock, ignites and extinguishes the boiler according to a schedule, reducing the number of tasks required to operate the boiler to almost zero. With the option to add the ecoNET300 internet module to the boiler, you can manage the boiler’s functions from your phone, tablet, or computer.
Available powers: 16kW | 20kW | 25kW | 32kW
Fuel: Pellets
Certificates: EcoDesign | 5 class
Energy class: A +
Key benefits
Heat exchanger
Horizontal convection channels | shelf
Effective design for quick cleaning of the exchanger from the front. The design of the boiler exchanger ensures high heat removal from the furnace.
Flue outlet
At the back of the boiler or at the top
The structure of the boiler has been designed in such a way that the flue outlet is located at the back of the boiler or at the front. The use of such a solution in a central heating boiler allows the flue to be led out directly or indirectly to the chimney.
Limit switch
For the sake of your safety, the boiler is equipped with a limit switch. The end protection system is located in the boiler door. Each opening of the door causes the burner and other elements of the boiler to stop working automatically until they are closed again.
Ceramic plates
The use of ceramic plates in the combustion chamber improves the efficiency of the combustion process. The screens increase the temperature in the combustion chamber and stop the particles floating above the furnace, burning them up. The thermal efficiency of the boiler increases, and the flue gas has a reduced amount of compounds harmful to the environment to a minimum.
Automatic feeder
The PLATINUM PELLET controller, based on the information received from the sensors, determines the demand for fuel and doses it the right amount. The process of fuel combustion itself is therefore very economical, ecological and does not require additional service on the part of the user.
Swirlers
The swirlers installed in the convection channels effectively reduce the speed of the exhaust gas outlet while maintaining high heat reception through the water jacket.
Boiler control
Adjust the boiler operation and room temperature to your individual needs. The PLATINUM PELLET controller is programmed in such a way as to automate all processes related to the heating of your home. The owner specifies the temperature he wants to have in the apartment, and the controller will optimize combustion in this respect. Entering the advanced driver settings, you can personalize each parameter. It all depends on the preferences of the user and household members!
Key features:
One CH.1 mixing circuit with room thermostat
Pump (DHW, CH, additional)
RTC clock with weekly timer
Weather control
Winter / summer operation mode
FuzzyLogic & PID
Optional equipment:
ecoNET 300 internet module
Control the work, monitor, compare the statistics thanks to the connection of the boiler controller with the internet module. Gain access to boiler control from a mobile phone, tablet or computer. The internet module is not only a remote control, it also records and registers the course of heating the house. Thanks to the ecoNET internet module (wired, wi-fi) you can gain control over your expenses and nothing will surprise you anymore!
Lambda probe
PLATINUM TOUCH room thermostat (touch, wired)
PLATINUM TOUCH x40 room thermostat (analog, wireless)
PLATINUM TOUCH x80 room thermostat (touch, wireless)
Platinum B module (buffer operation control, additional two heating circuits, 2x pump, 2x mixer, 2x thermostat)
Platinum C module (two additional heating circuits, 2x pump, 2x mixer, 2x thermostat)
Pellet burner
Self-cleaning PPW burner – for pellets
Quick firing up of the furnace and automatic cleaning of the furnace of ash. The burner is equipped with an automatic ceramic pellet igniter and has been designed for regular, automatic cleaning of ash. The design of the burner allows you to quickly reach a high temperature of the boiler. All functions of cleaning the furnace from ash and fuel dosage can be set in accordance with the current needs of the user.Key features:
Fuel: Pellet
Ecological fuel such as pellets, also known as biomass, is produced by pressing wood waste such as sawdust or shavings. This completely natural fuel turns into biodegradable ash after burning.
Ceramic pellet lighter
Forget about manual boiler lighting. One click is enough and the automatic ceramic igniter ignites the fuel fed to the burner. Automatic igniter in conjunction with the RTC clock allows you to program the entire week of operation of the device. The device operation clock can be set separately for SUMMER and WINTER mode.
Automatic cleaning
The burner is cleaned of ash on its own on a regular basis, which reduces the need for manual cleaning to a minimum. The use of this technology prevents clogging of the furnace chamber with ash, and also allows the burner to be kept in excellent efficiency.
Technical data of the boiler
PARAMETERS | UNIT S.I. | SMART PELLET WF PRO 16 |
Nominal thermal power | [kW] | 16 |
Boiler power range | [kW] | 4,8-16 |
Heatable surface* | [m2] | 72-240 |
Water capacity | [L] | 48 |
Maximum working pressure | [bar] | 3 |
Maximum working temperature | [°C] | 80 |
Test pressure | [bar] | 4,5 |
Fuel tank capacity | [L] | 160 |
Fuel tank capacity | [kg] | 96 |
Fuel | [-] | pellets Φ6-8mm |
Electrical connection | [-] | 2A; ~230V; 50Hz |
Electric power consumption | [W] | 115 |
Temperature controller setting range | [°C] | 60-80 (every 1°C) |
Chimney draft required | [Pa] | 18 |
Boiler weight | [kg] | 335 |
PARAMETERS | UNIT S.I. | SMART PELLET WF PRO 20 |
Nominal thermal power | [kW] | 20 |
Boiler power range | [kW] | 6-20 |
Heatable surface* | [m2] | 90-300 |
Water capacity | [L] | 60 |
Maximum working pressure | [bar] | 3 |
Maximum working temperature | [°C] | 80 |
Test pressure | [bar] | 4,5 |
Fuel tank capacity | [L] | 175 |
Fuel tank capacity | [kg] | 105 |
Fuel | [-] | pellets Φ6-8mm |
Electrical connection | [-] | 2A; ~230V; 50Hz |
Electric power consumption | [W] | 115 |
Temperature controller setting range | [°C] | 60-80 (every 1°C) |
Chimney draft required | [Pa] | 19 |
Boiler weight | [kg] | 405 |
PARAMETERS | UNIT S.I. | SMART PELLET WF PRO 25 |
Nominal thermal power | [kW] | 25 |
Boiler power range | [kW] | 7,5-25 |
Heatable surface* | [m2] | 112,5-375 |
Water capacity | [L] | 71 |
Maximum working pressure | [bar] | 3 |
Maximum working temperature | [°C] | 80 |
Test pressure | [bar] | 4,5 |
Fuel tank capacity | [L] | 200 |
Fuel tank capacity | [kg] | 120 |
Fuel | [-] | pellets Φ6-8mm |
Electrical connection | [-] | 2A; ~230V; 50Hz |
Electric power consumption | [W] | 115 |
Temperature controller setting range | [°C] | 60-80 (every 1°C) |
Chimney draft required | [Pa] | 20 |
Boiler weight | [kg] | 445 |
* A new building with very good thermal insulation was adopted for the calculations.
PARAMETERS | UNIT S.I. | SMART PELLET WF PRO 32 |
Nominal thermal power | [kW] | 32 |
Boiler power range | [kW] | 9,6-32 |
Heatable surface* | [m2] | 144-480 |
Water capacity | [L] | 80 |
Maximum working pressure | [bar] | 3 |
Maximum working temperature | [°C] | 80 |
Test pressure | [bar] | 4,5 |
Fuel tank capacity | [L] | 290 |
Fuel tank capacity | [kg] | 174 |
Fuel | [-] | pellets Φ6-8mm |
Electrical connection | [-] | 2A; ~230V; 50Hz |
Electric power consumption | [W] | 115 |
Temperature controller setting range | [°C] | 60-80 (every 1°C) |
Chimney draft required | [Pa] | 22 |
Boiler weight | [kg] | 495 |
Certificates, class, boiler emission
PARAMETERS | UNIT S.I. | SMART PELLET WF PRO 16 |
Ecodesign | [-] | Yes |
Boiler class | [-] | 5 |
Energy class | [-] | A+ |
Seasonal particulate emissions | [mg/m3] | 16,47 |
Efficiency for nominal power | [%] | 92,13 |
Nominal emissivity of the particulate matter | [mg/m3] | 11,09 |
Efficiency at minimum power | [%] | 92,68 |
Minimum emissivity of particulate matter | [mg/m3] | 17,42 |
PARAMETERS | UNIT S.I. | SMART PELLET WF PRO 20 |
Ecodesign | [-] | Yes |
Boiler class | [-] | 5 |
Energy class | [-] | A+ |
Seasonal particulate emissions | [mg/m3] | 17,27 |
Efficiency for nominal power | [%] | 92,36 |
Nominal emissivity of the particulate matter | [mg/m3] | 12,94 |
Efficiency at minimum power | [%] | 91,92 |
Minimum emissivity of particulate matter | [mg/m3] | 18,03 |
PARAMETERS | UNIT S.I. | SMART PELLET WF PRO 25 |
Ecodesign | [-] | Yes |
Boiler class | [-] | 5 |
Energy class | [-] | A+ |
Seasonal particulate emissions | [mg/m3] | 17,25 |
Efficiency for nominal power | [%] | 92,22 |
Nominal emissivity of the particulate matter | [mg/m3] | 15,93 |
Efficiency at minimum power | [%] | 91,59 |
Minimum emissivity of particulate matter | [mg/m3] | 17,48 |
PARAMETERS | UNIT S.I. | SMART PELLET WF PRO 32 |
Ecodesign | [-] | Yes |
Boiler class | [-] | 5 |
Energy class | [-] | A+ |
Seasonal particulate emissions | [mg/m3] | 17,02 |
Efficiency for nominal power | [%] | 92,44 |
Nominal emissivity of the particulate matter | [mg/m3] | 15,02 |
Efficiency at minimum power | [%] | 91,57 |
Minimum emissivity of particulate matter | [mg/m3] | 17,37 |
Boiler dimensions
DIMENSION | UNIT S.I. | SMART PELLET WF PRO 16 |
A | [mm] | 1150 |
B1 | [mm] | 530 |
B2 | [mm] | 615 |
C1 | [mm] | 1345 |
C2 | [mm] | 1295 |
D1 | [mm] | 770 |
D2 | [mm] | 646 |
E | [mm] | 712 |
F1 | [mm] | 520 |
F1′ | [mm] | 1100 |
F2 | [mm] | 140 |
F3 | [mm] | 115 |
F4 | [mm] | 1100 |
G1 | [mm] | 160 |
G2 | [cal] | 1 1/2 |
G3 | [cal] | 3/4 |
G4 | [cal] | 1 1/2 |
H | [mm] | 30 |
DIMENSION | UNIT S.I. | SMART PELLET WF PRO 20 |
A | [mm] | 1150 |
B1 | [mm] | 530 |
B2 | [mm] | 615 |
C1 | [mm] | 1400 |
C2 | [mm] | 1350 |
D1 | [mm] | 840 |
D2 | [mm] | 716 |
E | [mm] | 716 |
F1 | [mm] | 590 |
F1′ | [mm] | 1160 |
F2 | [mm] | 140 |
F3 | [mm] | 115 |
F4 | [mm] | 1160 |
G1 | [mm] | 160 |
G2 | [cal] | 1 1/2 |
G3 | [cal] | 3/4 |
G4 | [cal] | 1 1/2 |
H | [mm] | 30 |
DIMENSION | UNIT S.I. | SMART PELLET WF PRO 25 |
A | [mm] | 1200 |
B1 | [mm] | 580 |
B2 | [mm] | 615 |
C1 | [mm] | 1400 |
C2 | [mm] | 1350 |
D1 | [mm] | 930 |
D2 | [mm] | 806 |
E | [mm] | 806 |
F1 | [mm] | 680 |
F1′ | [mm] | 1160 |
F2 | [mm] | 140 |
F3 | [mm] | 115 |
F4 | [mm] | 1160 |
G1 | [mm] | 160 |
G2 | [cal] | 1 1/2 |
G3 | [cal] | 3/4 |
G4 | [cal] | 1 1/2 |
H | [mm] | 30 |
DIMENSION | UNIT S.I. | SMART PELLET WF PRO 32 |
A | [mm] | 1200 |
B1 | [mm] | 580 |
B2 | [mm] | 615 |
C1 | [mm] | 1490 |
C2 | [mm] | 1450 |
D1 | [mm] | 955 |
D2 | [mm] | 806 |
E | [mm] | 806 |
F1 | [mm] | 665 |
F1′ | [mm] | 1255 |
F2 | [mm] | 140 |
F3 | [mm] | 115 |
F4 | [mm] | 1255 |
G1 | [mm] | 180 |
G2 | [cal] | 1 1/2 |
G3 | [cal] | 3/4 |
G4 | [cal] | 1 1/2 |
H | [mm] | 30 |
Boiler documentation
DTR instruction
Technical and operational documentation for the SMART PELLET WF PRO boiler | Download |
Driver manual
PLATIUM PELLET controller manual | Download |
EcoDesign certificate
The boiler complies with the requirements of the EcoDesign standard (EkoProjekt) | Download |
Energy label
A + energy class | Download |
Product sheet in accordance with EU regulation 2015/1187
According to EU Regulation 2015/1187 supplementing Directive 2009/125 / EC of the European Parliament and of the Council | Download |
Product sheet in accordance with EU regulation 2015/1189
Compliant with the EU Commission Regulation 2015/1189 of April 28, 2015 | Download |
Foreign sales
Do you have a question about your future central heating boiler?
Paweł Czepiel
Export manager Language: Russian, English Monday-Friday (7:00 a.m. – 3:00 p.m.)Phone:
+48 663 45 32 22 +48 85 711 94 54 ext. 17E-mail:
p.czepiel@metalfach.com.pl
METAL-FACH Technika Grzewcza Sp. z o.o. reserves the right to introduce changes to the technical parameters, equipment and specifications of the offered goods without prior notice.
General contact:
Opening hours:
- Mon.-Fri. 7:00a.m.-3:00p.m.
- Phone: +48 85 711 94 54 int. 17
- E-mail: p.czepiel@metalfach.com.pl
General contact:
Service contact:
Opening hours:
- Mon.-Fri. 7:00a.m.–3:00 p.m.
- Phone: +48 85 711 94 54 int. 17
- E-mail: p.czepiel@metalfach.com.pl
Address data:
METAL-FACH Technika Grzewcza
Sp. z o.o.
- st. Sikorskiego 66, 16-100 Sokółka, Poland
- NIP: 545-182-60-12
- REGON: 523566030