fbpx

BOILER

SMART BIO

The most important information

The SMART BIO boiler uses reliable technological and construction solutions that make it an extremely effective and proven source of heat. The boiler is designed for efficient combustion of wood pellets in accordance with the norm 303-5:2021-09. It is equipped with a self-cleaning burner. Pellet igniter cooperating with the RTC clock, firing up and extinguishing the boiler according to the schedule, reducing the number of activities to be performed at the boiler to almost zero. Thanks to the option of connecting the ecoNET300 internet module to the boiler, you can control the boiler’s functions using a phone, tablet, or computer.
Z
Powers available: 15kW | 20kW | 25kW | 30kW
Z
Fuel: Pellets
Z
Certificates: EcoDesign | 5th class
Z
Energy class: A+

The most important advantages

Z

Heat exchanger

Horizontal convection channels | regimental
Effective design adapted for quick cleaning of the exchanger from the front. The construction of the boiler exchanger ensures high heat removal from the furnace.
Z

Flue exit

At the top of the boiler
The boiler structure has been designed in such a way that the flue exits are at the top. The use of such a solution in the central heating boiler allows for direct discharge of the flue into the chimney.
Z

Limit switch

Out of concern for your safety, the boiler is equipped with a limit switch. The limit protection system is located in the boiler door and the tank hatch. Each time the door or flap is opened, the operation of the burner and other boiler elements is automatically stopped until they are closed again.
Z

Ceramic plates

The use of ceramic plates in the combustion chamber improves the efficiency of the combustion process. The screens increase the temperature in the combustion chamber and stop the particles floating above the furnace, burning it up. The thermal efficiency of the boiler increases, and the flue gases contain the amount of compounds harmful to the environment reduced to a minimum.
Z

Automatic feeder

The PLATINUM PELLET controller, based on the information received from the sensors, determines the demand for fuel and doses its appropriate amount. The fuel combustion process itself is therefore very economical, ecological and does not require additional service from the user.
Z

Turbulators

The swirlers installed in the convection ducts effectively reduce the velocity of the flue gas outlet, maintaining high heat transfer through the water jacket.

Boiler control

Adjust the boiler operation and temperature in the rooms to your individual needs. The PLATINUM PELLET controller is programmed in such a way as to automate all processes related to heating your home. The owner gives the temperature he wants in the apartment, and the controller will optimize combustion in this regard. By entering the advanced settings of the controller, you can personalize each parameter. It all depends on the preferences of the user and household members!

Key features:

E
One central heating mixing circuit with a room thermostat
E
Pump (DHW, CH, additional)
E
RTC clock with weekly programmer
E
Weather control
E
Winter/Summer operating mode
E
FuzzyLogic & PID

Additional equipment:

E
ecoNET 300 internet module
Control operation, monitor, compare statistics by connecting the boiler controller with the Internet module. Gain access to boiler control from a mobile phone, tablet or computer. The Internet module is not only a remote control, it is also a recording and register of the course of heating the house. Thanks to the ecoNET internet module (wired, wi-fi) you can gain control over your expenses and nothing will surprise you anymore!
E
Lambda probe
E
Room thermostat PLATINUM TOUCH (touch, wired)
E
Room thermostat PLATINUM TOUCH x40 (analog, wireless)
E
Room thermostat PLATINUM TOUCH x80 (touch, wireless)
E
Platinum B module (buffer operation control, two additional heating circuits, 2x pump, 2x mixer, 2x thermostat)
E
Platinum C module (additional two heating circuits, 2x pump, 2x mixer, 2x thermostat)

Pellet burner

Gutter burner – for pellets

These are one of the most popular pellet burners on the market. The burner is equipped with an automatic ceramic pellet igniter, which allows for its quick firing and extinguishing. The design of the burner allows you to quickly reach a high temperature of the boiler. All functions of firing up the furnace and fuel dosing can be set according to the current needs of the user.

Key Features:

E
Fuel: Pellet
Ecological fuel, which is pellets, also known as biomass, is made by pressing wood waste such as sawdust or shavings. This fully natural fuel turns into biodegradable ash when burned.
E
Ceramic pellet lighter
Forget about manually firing up the boiler. Just one click and the automatic ceramic igniter ignites the fuel fed to the burner. The automatic igniter combined with the RTC clock allows you to program the entire working week of the device. The device operation timer can be set separately for SUMMER and WINTER modes.

Boiler technical data

PARAMETERS S.I. UNIT SMART BIO 15
Nominal heat output [kW] 15
Boiler power range [kW] 4,5-15
Area that can be heated* [m2] 67,5-225
Water capacity [L] 48
Maximum working pressure [bar] 3
Maximum operating temperature [°C] 80
Test pressure [bar] 4,5
Fuel tank capacity [L] 190
Fuel tank capacity [kg] 114
Fuel [-] pellets Φ6-8mm
Electrical connection [-] 3A; ~230V; 50Hz
Electric power consumption [W] 290
Temperature controller setting range [°C] 60-80 (every 1°C)
Chimney draft required [Pa] 17
Boiler weight [kg] 335

*A new building with very good thermal insulation was used for the calculations.

PARAMETERS S.I. UNIT SMART BIO 20
Nominal heat output [kW] 20
Boiler power range [kW] 6-20
Area that can be heated* [m2] 90-300
Water capacity [L] 60
Maximum working pressure [bar] 3
Maximum operating temperature [°C] 80
Test pressure [bar] 4,5
Pojemność zasobnika paliwa [L] 200
Fuel tank capacity [kg] 120
Fuel [-] pellets Φ6-8mm
Electrical connection [-] 3A; ~230V; 50Hz
Electric power consumption [W] 290
Temperature controller setting range [°C] 60-80 (every 1°C)
Chimney draft required [Pa] 20
Boiler weight [kg] 360

*A new building with very good thermal insulation was used for the calculations.

PARAMETERS S.I. UNIT SMART BIO 25
Nominal heat output [kW] 25
Boiler power range [kW] 7,5-25
Area that can be heated* [m2] 112,5-375
Water capacity [L] 71
Maximum working pressure [bar] 3
Maximum operating temperature [°C] 80
Test pressure [bar] 4,5
Fuel tank capacity [L] 260
Fuel tank capacity [kg] 156
Fuel [-] pellets Φ6-8mm
Electrical connection [-] 3A; ~230V; 50Hz
Electric power consumption [W] 290
Temperature controller setting range [°C] 60-80 (every 1°C)
Chimney draft required [Pa] 20
Boiler weight [kg] 410

*A new building with very good thermal insulation was used for the calculations.

PARAMETERS S.I. UNIT SMART BIO 30
Nominal heat output [kW] 30
Boiler power range [kW] 9-30
Area that can be heated* [m2] 135-450
Water capacity [L] 80
Maximum working pressure [bar] 3
Maximum operating temperature [°C] 80
Test pressure [bar] 4,5
Fuel tank capacity [L] 260
Fuel tank capacity [kg] 156
Fuel [-] pellets Φ6-8mm
Electrical connection [-] 3A; ~230V; 50Hz
Electric power consumption [W] 290
Temperature controller setting range [°C] 60-80 (co 1°C)
Chimney draft required [Pa] 26
Boiler weight [kg] 430

*A new building with very good thermal insulation was used for the calculations.

Certificates, class, boiler emissivity

PARAMETERS S.I. UNIT SMART BIO 15
Ecodesign (Eko Project) [-] Yes
Boiler class [-] 5
Energy class [-] A+
Seasonal emissivity of particulate matter [mg/m3] 19
Efficiency for nominal power [%] 90,7
Particulate nominal emissivity [mg/m3] 20
Efficiency for minimum power [%] 89,9
Minimum emissivity of particulates [mg/m3] 12
PARAMETERS S.I. UNIT SMART BIO 20
Ecodesign (Eko Project) [-] Yes
Boiler class [-] 5
Energy class [-] A+
Seasonal emissivity of particulate matter [mg/m3] 14
Efficiency for nominal power [%] 90,2
Particulate nominal emissivity [mg/m3] 10
Efficiency for minimum power [%] 90,0
Minimum emissivity of particulates [mg/m3] 15
PARAMETERS S.I. UNIT SMART BIO 25
Ecodesign (Eko Project) [-] Yes
Boiler class [-] 5
Energy class [-] A+
Seasonal emissivity of particulate matter [mg/m3] 19
Efficiency for nominal power [%] 90,6
Particulate nominal emissivity [mg/m3] 15
Efficiency for minimum power [%] 90,0
Minimum emissivity of particulates [mg/m3] 20
PARAMETERS S.I. UNIT SMART BIO 30
Ecodesign (Eko Project) [-] Yes
Boiler class [-] 5
Energy class [-] A+
Seasonal emissivity of particulate matter [mg/m3] 16
Efficiency for nominal power [%] 90,7
Particulate nominal emissivity [mg/m3] 15
Efficiency for minimum power [%] 90,2
Minimum emissivity of particulates [mg/m3] 16

Boiler dimensions

DIMENSION S.I. UNIT SMART BIO 15
A [mm] 1150
B1 [mm] 535
B2 [mm] 580
C1 [mm] 1340
C2 [mm] 1240
D1 [mm] 590
D2 [mm] 560
E [mm]
F1 [mm] 435
F1′ [mm] 1100
F2 [mm] 1100
F3 [mm] 140
F4 [mm] 115
G1 [mm] 160
G2 [cal] 1 1/2
G3 [cal] 1 1/2
G4 [cal] 3/4
H [mm] 30
DIMENSION S.I. UNIT SMART BIO 20
A [mm] 1135
B1 [mm] 535
B2 [mm] 580
C1 [mm] 1400
C2 [mm] 1300
D1 [mm] 660
D2 [mm] 630
E [mm]
F1 [mm] 505
F1′ [mm] 1155
F2 [mm] 1160
F3 [mm] 140
F4 [mm] 115
G1 [mm] 160
G2 [cal] 1 1/2
G3 [cal] 1 1/2
G4 [cal] 3/4
H [mm] 30
DIMENSION S.I. UNIT SMART BIO 25
A [mm] 1300
B1 [mm] 585
B2 [mm] 680
C1 [mm] 1400
C2 [mm] 1300
D1 [mm] 750
D2 [mm] 720
E [mm]
F1 [mm] 595
F1′ [mm] 1155
F2 [mm] 1160
F3 [mm] 140
F4 [mm] 115
G1 [mm] 160
G2 [cal] 1 1/2
G3 [cal] 1 1/2
G4 [cal] 3/4
H [mm] 30
DIMENSION S.I. UNIT SMART BIO 30
A [mm] 1300
B1 [mm] 585
B2 [mm] 680
C1 [mm] 1485
C2 [mm] 1395
D1 [mm] 750
D2 [mm] 720
E [mm]
F1 [mm] 580
F1′ [mm] 1190
F2 [mm] 1255
F3 [mm] 140
F4 [mm] 115
G1 [mm] 180
G2 [cal] 1 1/2
G3 [cal] 1 1/2
G4 [cal] 3/4
H [mm] 30

Boiler documentation

DTR manual

Technical and operational documentation for the SMART BIO boiler Download

Driver Manual

PLATINUM PELLET controller manual Download

EcoDesign certificate

Boiler compliant with the requirements of the EcoDesign standard (EcoDesign) Download

Energy label

Energy class A+ Download

Product fiche in accordance with EU Regulation 2015/1187

In accordance with EU Regulation 2015/1187 supplementing Directive 2009/125/EC of the European Parliament and of the Council Download

Product sheet according to EU Regulation 2015/1189

Complies with the Regulation of the EU Commission 2015/1189 of April 28, 2015 Download

Foreign sales

Do you have a question about your future central heating boiler?

Paweł Czepiel

Export manager
Language: Russian, English
Monday-Friday (7:00 a.m. – 3:00 p.m.)

Phone:

+48 663 45 32 22
+48 85 711 94 54 ext. 17

E-mail:

p.czepiel@metalfach.com.pl

METAL-FACH Technika Grzewcza Sp. z o.o. reserves the right to introduce changes to the technical parameters, equipment and specifications of the offered goods without prior notice.

Dane adresowe:

METAL-FACH Technika Grzewcza
Sp. z o.o.

  • ul. Sikorskiego 66, 16-100 Sokółka, Polska
  • NIP: 545-182-60-12
  • REGON: 523566030

Kontakt ogólny:

Otwarte:

  • Pon.-Pt. 07: 00-15:00
  • Tel. +48 85 711 94 54
  • E-mail: sprzedaz@metalfach.com.pl

Kontakt serwis:

Kotły c.o.:

  • Pon.-Pt. 7:00-20:00
  • Tel. +48 85 711 94 56
  • E-mail: serwis.kotly@metalfach.com.pl

Kontakt serwis:

Pompy ciepła:

  • Pon.-Pt. 7:00-15:00
  • Tel. +48 85 711 94 54 wew. 12
  • E-mail: serwis.pompy@metalfach.com.pl

2010-2024 © Copyright METAL-FACH Technika Grzewcza Sp. z o.o. | Wszelkie prawa zastrzeżone.