fbpx

BOILER

SMART EKO

Contact with an advisor
General information
Technical data
Dimensions
Documentation

The most important information

The SMART EKO boiler is an ideal solution dedicated to people who value efficiency and do not want to give up comfort. The boiler is adapted to the efficient combustion of hard coal in accordance with the PN EN 303-5: 2021-09 standard. Additionally, the cast iron burner is equipped with components that guarantee many years of uninterrupted operation of the device. Thanks to the possibility of connecting an internet module to the boiler, you can manage the boiler functions from your phone, tablet or computer.
Warranty conditions in the DTR Manual
Z
Available powers: 12kW I 15kW I 20kW I 25kW I 30kW
Z
Fuel: Eco-pea coal
Z
Certificates: EcoDesign | 5th Class
Z
Energy class: B

The most important advantages

Z

Heat exchanger

Horizontal convection channels | shelf
Effective design adapted for quick cleaning of the exchanger from the front. The construction of the boiler exchanger ensures high heat removal from the furnace.
Z

Flue exit

At the top of the boiler
The boiler structure has been designed so that the flue outlet is located at the top. The design solution of the boiler body allows the boiler to be pushed almost to the wall.
Z

Limit switch

Out of concern for your safety, the boiler is equipped with a limit switch. The limit protection system is located in the boiler door and in the tank flap. Each opening automatically stops the operation of the burner and other elements of the boiler until they are closed again.
Z

Highly efficient combustion chamber

Thanks to the use of ceramic fittings together with the burner, the boiler achieves high efficiency. This technological solution increases the temperature in the combustion chamber and stops particles floating above the furnace, burning them. As a result of this process, the thermal efficiency of the furnace increases, and the flue gases have the amount of compounds harmful to the environment reduced to a minimum.
Z

Automatic feeder

The TECH ST 483 controller, based on information received from sensors, determines the fuel demand and doses the appropriate amount. The fuel combustion process itself is therefore very economical, ecological and does not require additional user support.
Z

Turbulators

The swirlers installed in the convection ducts effectively reduce the velocity of the flue gas outlet, maintaining high heat transfer through the water jacket.

Boiler control

Adjust the boiler operation and room temperature to your own individual needs. The TECH ST 483 controller is programmed to automate all processes related to home heating. The user enters the temperature they want in the room, and the controller will optimize combustion in this respect. By entering the advanced controller settings, you can personalize each parameter. It all depends on the preferences of the user and household members!

Key features:

E
Pump (DHW, C.O.1, circulation, additional)
E
One C.O.1 mixing circuit with room thermostat
E
Weather control

Optional equipment:

E
TECH Internet module (wireless, wi-fi)
E
TECH Internet module (wired, wi-fi)
E
Termostat pokojowy TECH ST280 + ST260 (dotykowy, bezprzewodowy)

Burner for eco-pea coal

Cast iron burner Ekoenergia II – for eco-pea coal

Cast-iron carburizing system for the boiler with manual firing up of the furnace. The eco pea burner and its components in contact with high temperature are made of cast iron. Thanks to the use of this material for the construction of the burner, these elements are more resistant to corrosion than ordinary steel, even if we use moist fuel. The cast-iron elements of the burner also reduce the noise of the feeder operation. The burner and the feeding screw are made of ductile cast iron, resistant primarily to abrasion and high temperature. A burner constructed in this way will work reliably for many years.

Key features:

E
Fuel: Eco peas
Ecological fuel from the depths of the earth. Eco pea fuel is produced on the basis of hard coal. The prefix “eco” means that it meets the stricter gas emission standards. The eco-pea fuel has a negligible sulfur content, a small amount of ash and low humidity. When burning, it produces much less harmful compounds than ordinary coal.
E
Screw feeder
The screw feeder precisely doses the fuel, is resistant to abrasion, corrosion and high temperature.
E
Gear motor cotter pin
Prevents damage to the gear motor. When there is an element in the feeder that the screw will not be able to push out, the cotter pin will break, which will protect the boiler against more serious damage to the feeding system.

Boiler technical data

PARAMETERS S.I. UNIT SMART EKO 12
Nominal heat output [kW] 12
Boiler power range [kW] 3,6-12
Area that can be heated* [m2] 54-180
Water capacity [L] 48
Maximum working pressure [bar] 3
Maximum operating temperature [°C] 80
Test pressure [bar] 4,5
Fuel tank capacity [L] 200
Fuel tank capacity [kg] 146
Fuel [-] eco-pea coal Φ0-32mm
Electrical connection [-] 5A; ~230V; 50Hz
Electric power consumption [W] 350
Temperature controller setting range [°C] 60-80 (every 1°C)
Chimney draft required [Pa] 16
Boiler weight [kg] 370

*A new building with very good thermal insulation was used for the calculations.

PARAMETERS S.I. UNIT SMART EKO 15
Nominal heat output [kW] 15
Boiler power range [kW] 4,5-15
Area that can be heated* [m2] 67,5-225
Water capacity [L] 48
Maximum working pressure [bar] 3
Maximum operating temperature [°C] 80
Test pressure [bar] 4,5
Fuel tank capacity [L] 200
Fuel tank capacity [kg] 146
Fuel [-] eco-pea coal Φ0-32mm
Electrical connection [-] 5A; ~230V; 50Hz
Electric power consumption [W] 350
Temperature controller setting range [°C] 60-80 (every 1°C)
Chimney draft required [Pa] 18
Boiler weight [kg] 380

*A new building with very good thermal insulation was used for the calculations.

PARAMETERS S.I. UNIT SMART EKO 20
Nominal heat output [kW] 20
Boiler power range [kW] 6-20
Area that can be heated* [m2] 90-300
Water capacity [L] 60
Maximum working pressure [bar] 3
Maximum operating temperature [°C] 80
Test pressure [bar] 4,5
Fuel tank capacity [L] 200
Fuel tank capacity [kg] 146
Fuel [-] eco-pea coal Φ0-32mm
Electrical connection [-] 5A; ~230V; 50Hz
Electric power consumption [W] 350
Temperature controller setting range [°C] 60-80 (every 1°C)
Chimney draft required [Pa] 20
Boiler weight [kg] 405

*A new building with very good thermal insulation was used for the calculations.

PARAMETERS S.I. UNIT SMART EKO 25
Nominal heat output [kW] 25
Boiler power range [kW] 7,5-25
Area that can be heated* [m2] 112,5-375
water capacity [L] 71
Maximum working pressure [bar] 3
Maximum operating temperature [°C] 80
Test pressure [bar] 4,5
Fuel tank capacity [L] 200
Fuel tank capacity [kg] 146
Fuel [-] eco-pea coal Φ0-32mm
Electrical connection [-] 5A; ~230V; 50Hz
Electric power consumption [W] 350
Temperature controller setting range [°C] 60-80 (every 1°C)
Chimney draft required [Pa] 21
Boiler weight [kg] 480

*A new building with very good thermal insulation was used for the calculations.

PARAMETERS S.I. UNIT SMART EKO 30
Nominal heat output [kW] 30
Boiler power range [kW] 9-30
Area that can be heated* [m2] 135-450
water capacity [L] 80
Maximum working pressure [bar] 3
Maximum operating temperature [°C] 80
Test pressure [bar] 4,5
Fuel tank capacity [L] 200
Fuel tank capacity [kg] 146
Fuel [-] eco-pea coal Φ0-32mm
Electrical connection [-] 5A; ~230V; 50Hz
Electric power consumption [W] 350
Temperature controller setting range [°C] 60-80 (every 1°C)
Chimney draft required [Pa] 22
Boiler weight [kg] 522

*A new building with very good thermal insulation was used for the calculations.

Certificates, class, boiler emissivity

PARAMETERS S.I. UNIT SMART EKO 12
Ecodesign (Eco Design) [-] Yes
Boiler class [-] 5
Energy class [-] B
Seasonal emissivity of particulate matter [mg/m3] 26,32
Efficiency for nominal power [%] 90,96
Particulate nominal emissivity [mg/m3] 28,67
Efficiency for minimum power [%] 90,74
Minimum emissivity of particulates [mg/m3] 25,91
PARAMETERS S.I. UNIT SMART EKO 15
Ecodesign (Eco Design) [-] Yes
Boiler class [-] 5
Energy class [-] B
Seasonal emissivity of particulate matter [mg/m3] 23,35
Efficiency for nominal power [%] 90,69
Particulate nominal emissivity [mg/m3] 28,02
Efficiency for minimum power [%] 90,95
Minimum emissivity of particulates [mg/m3] 22,52
PARAMETERS S.I. UNIT SMART EKO 20
Ecodesign (Eco Design) [-] Yes
Boiler class [-] 5
Energy class [-] B
Seasonal emissivity of particulate matter [mg/m3] 22,58
Efficiency for nominal power [%] 91,0
Particulate nominal emissivity [mg/m3] 30,06
Efficiency for minimum power [%] 90,71
Minimum emissivity of particulates [mg/m3] 21,26
PARAMETERS S.I. UNIT SMART EKO 25
Ecodesign (Eco Design) [-] Yes
Boiler class [-] 5
Energy class [-] B
Seasonal emissivity of particulate matter [mg/m3] 23,19
Efficiency for nominal power [%] 90,94
Particulate nominal emissivity [mg/m3] 28,90
Efficiency for minimum power [%] 90,72
Minimum emissivity of particulates [mg/m3] 22,18
PARAMETERS S.I. UNIT SMART EKO 30
Ecodesign (Eco Design) [-] Yes
Boiler class [-] 5
Energy class [-] B
Seasonal emissivity of particulate matter [mg/m3] 23,08
Efficiency for nominal power [%] 91,02
Particulate nominal emissivity [mg/m3] 27,78
Efficiency for minimum power [%] 90,88
Minimum emissivity of particulates [mg/m3] 22,25

Boiler dimensions

DIMENSION S.I. UNIT SMART EKO 12
A [mm] 1135
B1 [mm] 535
B2 [mm] 580
C1 [mm] 1340
C2 [mm] 1240
D1 [mm] 590
D2 [mm] 560
E [mm] 610
F1 [mm] 435
F2 [mm] 1100
F3 [mm] 140
F4 [mm] 115
G1 [mm] 160
G2 [cal] 1 1/2
G3 [cal] 1 1/2
G4 [cal] 3/4
H [mm] 30
DIMENSION S.I. UNIT SMART EKO 15
A [mm] 1135
B1 [mm] 535
B2 [mm] 580
C1 [mm] 1340
C2 [mm] 1240
D1 [mm] 590
D2 [mm] 560
E [mm] 610
F1 [mm] 435
F2 [mm] 1100
F3 [mm] 140
F4 [mm] 115
G1 [mm] 160
G2 [cal] 1 1/2
G3 [cal] 1 1/2
G4 [cal] 3/4
H [mm] 30
DIMENSION S.I. UNIT SMART EKO 20
A [mm] 1135
B1 [mm] 535
B2 [mm] 580
C1 [mm] 1400
C2 [mm] 1300
D1 [mm] 660
D2 [mm] 630
E [mm] 630
F1 [mm] 505
F2 [mm] 1155
F3 [mm] 140
F4 [mm] 115
G1 [mm] 160
G2 [cal] 1 1/2
G3 [cal] 1 1/2
G4 [cal] 3/4
H [mm] 30
DIMENSION S.I. UNIT SMART EKO 25
A [mm] 1185
B1 [mm] 585
B2 [mm] 580
C1 [mm] 1400
C2 [mm] 1300
D1 [mm] 750
D2 [mm] 720
E [mm] 630
F1 [mm] 595
F2 [mm] 1155
F3 [mm] 140
F4 [mm] 115
G1 [mm] 160
G2 [cal] 1 1/2
G3 [cal] 1 1/2
G4 [cal] 3/4
H [mm] 30
DIMENSION S.I. UNIT SMART EKO 30
A [mm] 1300
B1 [mm] 585
B2 [mm] 580
C1 [mm] 1485
C2 [mm] 1395
D1 [mm] 750
D2 [mm] 720
E [mm] 630
F1 [mm] 580
F2 [mm] 1255
F3 [mm] 140
F4 [mm] 115
G1 [mm] 180
G2 [cal] 1 1/2
G3 [cal] 1 1/2
G4 [cal] 3/4
H [mm] 30

Boiler documentation

DTR manual

Technical and operational documentation for the SMART EKO boiler Download

Driver Manual

PLATINUM driver manual Download

EcoDesign certificate

Boiler compliant with the requirements of the EcoDesign standard (EcoDesign) Download

Energy label

Energy class A+ Download

Product fiche in accordance with EU Regulation 2015/1187

In accordance with EU Regulation 2015/1187 supplementing Directive 2009/125/EC of the European Parliament and of the Council Download

Product sheet according to EU Regulation 2015/1189

Compliant with the Regulation of the EU Commission 2015/1189 of April 28, 2015. Download

Foreign sales

Do you have a question about your future central heating boiler?

Paweł Czepiel

Export manager
Language: Russian, English
Monday-Friday (7:00 a.m. – 3:00 p.m.)

Phone:

+48 663 45 32 22
+48 85 711 94 54 ext. 17

Call me

E-mail:

p.czepiel@metalfach.com.pl

Write
METAL-FACH Technika Grzewcza Sp. z o.o. reserves the right to introduce changes to the technical parameters, equipment and specifications of the offered goods without prior notice.

Dane adresowe:

METAL-FACH Technika Grzewcza
Sp. z o.o.

  • ul. Sikorskiego 66, 16-100 Sokółka, Polska
  • NIP: 545-182-60-12
  • REGON: 523566030

Kontakt ogólny:

Otwarte:

  • Pon.-Pt. 07: 00-15:00
  • Tel. +48 85 711 94 54
  • E-mail: sprzedaz@metalfach.com.pl

Kontakt serwis:

Kotły c.o.:

  • Pon.-Pt. 7:00-20:00
  • Sob. 8:00-14:00
  • Niedz. 10:00-14:00
  • Tel. +48 85 711 94 56
  • E-mail: serwis.kotly@metalfach.com.pl

Kontakt serwis:

Pompy ciepła:

  • Pon.-Pt. 7:00-15:00
  • Tel. +48 85 711 94 54 wew. 12
  • E-mail: serwis.pompy@metalfach.com.pl

Produkty:

Dofinansowanie:

Social Media:

2010-2024 © Copyright METAL-FACH Technika Grzewcza Sp. z o.o. | Wszelkie prawa zastrzeżone.

Polityka prywatności i RODO